Maintaining Your Laser Welder

Keeping your laser welder clean is so important. A clean laser welder will run smoother and have less issues down the road. Not to mention, a dirty machine can shorten its "life expectancy".
Follow these simple steps to maintain your laser welder. We suggest marking the cleanings on a calender so you don't forget the last time you checked these areas.

Every Two Weeks:
  1. Clean lens protector - 91% isopropyl alcohol
  2. Check water level in rear. If you need to add water, remove the small metal plate in rear, pull out, remove both red caps and add distilled water only.
  3. Check if the air filter in the chamber needs replacing (probably not) - This step is simply a visual inspection. 

Every Six Months:
  1. Change the water - remember distilled only
    1. There are 2 hoses in the rear and 1 drain hose in the bottom
  2. Clean the charcoal filter on the bottom and vacuum out screens. Use a compressor to blow out the charcoal filter - do not use water!

No comments:

Post a Comment